10 Best Golf Cart Light Kit

Updated on: October 2020

Best Golf Cart Light Kit in 2020


TecScan LiTESeasy Deluxe Golf Cart Remote Control Lights & All Signals Kit

TecScan LiTESeasy Deluxe Golf Cart Remote Control Lights & All Signals Kit
BESTSELLER NO. 1 in 2020
  • Steering Wheel Mounted Remote Control of Self-Canceling Turn Signal Head, Tail & Hazard Lights
  • Patented Remote Brake Light Sensor...See Installation Video with Photos
  • SMD 2835 LED 400 Lumen Headlight, Extreme Visibility Taillight...Fits Most Carts
  • EZ Install Plug-in Wire Harness, Built-in Voltage Meter to aid installation, Hardware, Instructions
  • Live Phone Assistance...1 Year Warranty... Operates at both 12v & 16v

EZGO Golf Cart Headlight LED Tail Light Kit 1996 - Up EZGO Golf Carts

EZGO Golf Cart Headlight LED Tail Light Kit 1996 - Up EZGO Golf Carts
BESTSELLER NO. 2 in 2020
  • Fits 1996 to 2013 EZGO TXT Models.
  • Gives Your Cart That Factory Recessed Look.

Nilight ZH009 LED Light Bar 2PCS 18W Spot Off Road Lights with 16AWG Wiring Harness Kit-2 Lead, 2 Years Warranty.

Nilight ZH009 LED Light Bar 2PCS 18W Spot Off Road Lights with 16AWG Wiring Harness Kit-2 Lead, 2 Years Warranty.
BESTSELLER NO. 3 in 2020
  • Super bright spot beam: high-quality LED chips Emits bright white light; concentrated spot beam illuminates to further distance
  • Adjustable mounting bracket: the light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
  • Better heat dissipation: special designed die-cast aluminum alloy cooling fins effectively extend the lifespan to over 30, 000 hours
  • Superior quality wires: good electrical conductivity, high temperature and melting resistant, outstanding bending performance
  • Package include: 2Pcs 18W spot LED light bars, 1Pc wiring harness and mounting brackets

AW Golf Cart LED Light Kit ABS Plastic Compatible with EZGO TXT Golf Carts Outdoor Sport Light

AW Golf Cart LED Light Kit ABS Plastic Compatible with EZGO TXT Golf Carts Outdoor Sport Light
BESTSELLER NO. 4 in 2020
  • Fits EZGO TXT Golf Carts
  • LED red taillights for energy-saving and durability
  • New and improved wiring connectors
  • Golf cart light bar kit - offers everything you need to drive at night - headlight bar & taillights, wiring harness and an on/off switch
  • Headlight Bar Overall Dimension(LxWxH): 20" x 4 3/4" x 3 3/4" (51 x 12 x 9.5cm); Taillight Overall Dimenson(LxWxH): 8 5/8" x 3 1/2" x 6 1/8" (22 x 9 x 15.5cm); Voltage: 12V; LED Taillight Wattage (per Light): 13.5W

Govee Car Underglow Lights, 4 Pcs Led Strip Car Lights, 8 Color Neon Accent Lights Strip, Sync to Music, Wireless Remote Control 5050 RGB LED Strip Lights with Cable Tie & Screw

Govee Car Underglow Lights, 4 Pcs Led Strip Car Lights, 8 Color Neon Accent Lights Strip, Sync to Music, Wireless Remote Control 5050 RGB LED Strip Lights with Cable Tie & Screw
BESTSELLER NO. 5 in 2020
  • ➤ Remote Control : Wireless remote control, function button provide 8 color,4 lighting effects option, easy to ON/OFF and adjustable brightness. The Remote Range over 100FT.
  • ➤ Waterproof Strip Lights: The strip lights are waterproof. Designed with flexible tubing, Protected from terrible Road Conditions and Debris. High quality material and Low Temperature Resistance.
  • ➤ Music Mode & Multi Color : Wireless remote control color changing, flashing mode and music mode, create colorful gradient mode. Upgraded LED chip, provide brighter light, add the pleasure of the nights.
  • ➤ Universal Compatibility : Govee underglow kit lights, its voltage is compatible with 12V. It can be used by almost all of the car. Perfect for under wheel arches, around the front grille, under foot-wells, along the dash, Cars, SUV, Jeep, Vans, Truck,Boats, Motorcycle Decoration.
  • ➤ Easy Installation : Strong adhesive LED strip lights kit came with cable tie & screw, flexible and easy to install. It can be bent, fold, with your imagination to create your ambience. 2 pieces 35" and 2 pieces 47" waterproof LED strips, bright and colorful.

LEDGlow 4pc Million Color LED Golf Cart Underbody Underglow Accent Neon Light Kit for EZGO Yamaha Club Car - Water Resistant Flexible Tubes - Includes Control Box & Wireless Remote

LEDGlow 4pc Million Color LED Golf Cart Underbody Underglow Accent Neon Light Kit for EZGO Yamaha Club Car - Water Resistant Flexible Tubes - Includes Control Box & Wireless Remote
BESTSELLER NO. 6 in 2020
  • Add Ultra-Bright Multi-Color Underglow Lighting to Your Goft Cart with (4) 24" Flexible, Water Resistant Tubes that House 48 Wide Angle 5050 SMD LEDs
  • Control Box Features 18 Solid Color Modes that Include: Blue, Red, Green, Orange, Teal, Purple, Pink, Aqua, White, Lavender, Yellow, Light Green, Lime Green, Pale Green, Light Blue, Pale Blue, Light Purple & Light Pink
  • Additional Modes Include 5 Scan Modes, 5 Flash Modes, 5 Chase Modes, 5 Sound Activation Modes, 1 Color Change Mode & 1 Color Fade Mode
  • Includes 12 Volt Powered Control Box, Wireless Remote, 4-Port Junction Cable, Mounting Hardware & Installation Instructions
  • Free Lifetime Technical Support & One Year Limited Warranty Included with Each LEDGlow Purchase

TecScan LiTESeasy Standard Golf Cart LED Lights Kit & Integrated Voltmeter

TecScan LiTESeasy Standard Golf Cart LED Lights Kit & Integrated Voltmeter
BESTSELLER NO. 7 in 2020
  • Complete Plug–in kit - Easy to install - Integrated Voltmeter
  • Illuminates 20" x 20" area - Saves cutting big holes in fenders
  • Plug in Standard Head & Tail Light LED Kit W/on/off Switch
  • Bright Light uses only 4 watts - Great for Gas Carts, ATV's
  • Works at both 12v & 16v, 1-Year Warranty

10L0L Golf Cart LED Headlight and Tail Light Kit for Club Car DS Carts with Turn Signals Switch Horn Brake Lights Harness(Must Input 12 Volts)

10L0L Golf Cart LED Headlight and Tail Light Kit for Club Car DS Carts with Turn Signals Switch Horn Brake Lights Harness(Must Input 12 Volts)
BESTSELLER NO. 8 in 2020
  • Golf Cart Universal Deluxe LED head light & LED tail light kit for Club Car DS Carts. NOTE: ①If your cart is 48v or 36v, you must need a 48V-12V or 36V-12V reducer, if not, the led light will be burnt out. (voltage reducer is NOT INCLUDED), ②AS ours are the LED headlight and tail light which are bright enough, so the turn singal does not with the function of high beam. please noted it.
  • Led Light Kit for Club Car DS Package Contains: Comes with LED head lights, LED tail lights, turn signals and switch, horn, brake lights, harness hardware and instruction. with a 100% Guarantee and Provide our customer LIFETIME WARRANTY return or refund!
  • Led Light Kit for Club Car DS Great View at Night and Safe: You can drive your golf cart after dark, and be safe! These LED lights are stylish and perfect. From lights, to turn signals, to hazard flashers, and even the horn, Surprisingly bright led headlights and tail lights. Work great for you.
  • Complete High Quality Kit of the Golf Cart Led Headlight and Tail Light: ABS plastic, quartz glass, durable material preventing from damage of impact. The headlight lampshade is made of high transparent and high-strength glass, and has strong light transmission; Headlights and tail lights are bright LED and long service life.
  • Golf Cart Led Headlight and Tail Light Easy to install: Comes with detail instruction and easy to install on your 1993- UP Club Car DS Carts. It will takes about 2-3 hours to install. If encountered difficult, please feel free to contact us and we will help you solve it in 12 hours.

LEDGlow 12pc Million Color LED Golf Cart Underglow Accent Neon Lighting Kit with Wheel Well & Interior Lights for EZGO Yamaha Club Car - Fits Electric & Gas Golf Carts - Water Resistant

LEDGlow 12pc Million Color LED Golf Cart Underglow Accent Neon Lighting Kit with Wheel Well & Interior Lights for EZGO Yamaha Club Car - Fits Electric & Gas Golf Carts - Water Resistant
BESTSELLER NO. 9 in 2020
  • The Total Golf Cart LED Lighting Package with Underbody, Wheel Well & Interior Tubes Designed & Built Specifically for Gas & Electric Golf Carts
  • (2) 28" & (2) 18" Flexible Underbody Tubes, (4) 12" Flexible Wheel Well Tubes & (4) 8" Flexible Interior Tubes that Feature 156 Ultra-Bright 5050 SMD LEDs
  • 9 Solid Color Modes Include Blue, Red, Green, Orange, Teal, Pink, Hot Pink, Purple, White & Yellow, 3 Strobe Modes, 3 Fade Modes, 2 Flash Modes, Color Cycle Mode, Gradient Mode & Demo Mode
  • 12 Volt Powered Control Box with 2 Wireless Remotes, 12 Port Junction Box with 8 Port Plugs, Connection Cable, Mounting Hardware & Installation Instructions
  • Free Lifetime Technical Support & One Year Limited Warranty Included with Each LEDGlow Purchase

YITAMOTOR 21 Inch Light Bar Offroad Spot Flood Combo Led Bar Waterproof Dual Row LED Work Light with Wiring Harness compatible for Truck, 4X4, ATV, Boat, Jeep, LED Light Bar 120W White

YITAMOTOR 21 Inch Light Bar Offroad Spot Flood Combo Led Bar Waterproof Dual Row LED Work Light with Wiring Harness compatible for Truck, 4X4, ATV, Boat, Jeep, LED Light Bar 120W White
BESTSELLER NO. 10 in 2020
  • BRIGHTEN YOUR TRAIL: Features a DURABLE diecast aluminum body with dual-row 10,800 Lumens and 120 Watt output, YITAMOTOR 21" Offroad LED Light Bar is an ideal mid-size light choice for off-road use and will light up everything in front of you.
  • SOLID CONSTRUCTION: The YITAMOTOR 120W atv light bar comes with the mounting brackets and wiring kit for easy installation. With more than 50,000 hours of lifespan. While the IP67 rating make it incredibly resistant to water and dust.
  • COMBO BEAM DESIGN: The combination of two 60-degree flood beam and one 30-degree spot beam makes it lighter and wider to give you an incredibly clear visibility in any terrains, which helps avoid potential hazards on the road ahead.
  • UNIVERSAL USE: The 21'' light bar can be compatible for almost all Jeeps, 4x4, Trucks, Cars, Motorcycles, SUVs, ATVs, Boats. Besides that, this universal offroad led light bar also works as driving light, fog light, or other use.
  • BETTER HEAT DISSIPATION: 21 inch light bar is designed with high-quality heat conduction silicone gel and redesigned aluminum alloy housing, providing superior cooling effect for long working lifespan of light bar.

How to Wire a Hurricane Lamp

Convert an oil or fuel burning hurricane lamp to an electrical lit lamp using one of two methods. The first requires drilling through the glass base of the hurricane lamp while the second option using a light kit and requires no special tools.

The detailed ornate base and the glass flute of a hurricane lamp adds a touch of the past to any room. Traditional hurricane lamps use an oil-based fuel instead of electricity. It is possible to modify an oil-burning hurricane lamp and turn it into an electric light. The process takes less than 15 minutes when using a special hurricane lamp wiring kit with mounting collar, or you can us an electrical cord and a socket. A wiring kit provides the option of changing the hurricane lamp back to its original form by simply removing the light kit and adding the wick-burning mechanism.

Plastic container with lid
Liquid dish soap
Hot water
Bath towel
Masking tape
Electric Drill
1/4-inch diamond drill bit
Electrical cord
Light socket
Lint-free towel
Flat-head screwdriver
Hurricane lamp wiring kit with mounting collar
Light bulb

Step 1 -Remove the globe from the hurricane lamp and place it in a safe location.

Step 2 - Remove the wick-burning mechanism by unscrewing or popping it from the top of the lamp base. Place the mechanism in a safe location for storage.

Step 3 - Pour the contents of the hurricane lamp base in a plastic container. Seal the container and store.

Step 4 - Clean the inside chamber of the hurricane lamp with hot water and liquid dish washing soap. Fill the chamber, cover the opening completely with your hand and shake. Pour the contents from the chamber. Repeat the process three times.

Step 5 - Dry the container with a lint-free towel. Turn the container upside down and drain. Allow the inside chamber to dry completely before continuing. The drying process will take between 15 to 30 minutes depending on the temperature and humidity of the room.

Step 6 - Turn the hurricane lamp base on its side. Place the base on a folded bath towel.

Step 7 - Tear two pieces of masking tape that are two inches long. Create an X shape on the lamp base at the desired location for the electrical cord opening.

Step 8 - Slowly drill through the center of the X shape with a 1/4-inch diamond drill bit. Remove the tape when drilling is complete.

Step 9 - Remove glass shards from the inside of the lamp base. Fill the chamber, cover the opening completely with your hand and shake. Pour the contents from the chamber.

Step 10 - Dry the container with a lint-free towel. Turn the container upside down and drain. Allow the inside chamber to dry completely before continuing. The drying process will take between 15 to 30 minutes depending on the temperature and humidity of the room.

Step 11 - Remove the wick from the wick chamber. Drill a hole through the center of the wick chamber with the 1/4-inch diamond drill bit.

Step 12 - Place the end of the electrical cord with the exposed wires through the hole and into the chamber of the hurricane lamp base and through the hole on the wick chamber. Make sure to place the cord through the wick chamber beginning on the bottom of the chamber. The exposed wires will point through the top of the chamber.

Step 13 - Unscrew the screws on each side of the light socket just far enough to loop the ends of the wire from the cord over the screws. Hook one wire over each screw. Tighten the screws securely. Step

14 - Pull the light socket so it is snug with the wick chamber. Pry the metal opening for the wick open slightly if the socket is wobbly. Press the base of the light socket between the opening.

Step 15 - Secure the wick chamber to the hurricane lamp. Screw a light bulb into the light socket.

Step 16 - Place the hurricane globe in the mounting collar.

Light Kit Installation:

Step 1 - Remove the globe from the hurricane lamp and place it in a safe location. Remove the wick burning mechanism by unscrewing or popping it from the top of the lamp base. Place the mechanism in a safe location for storage.

Step 2 - Pour the contents of the hurricane lamp base in a plastic container. Seal the container and store.

Step 3 - Clean the inside chamber of the hurricane lamp with hot water and liquid dish washing soap. Fill the chamber, cover the opening completely with your hand and shake. Pour the contents from the chamber. Repeat the process a total of three times.

Step 4 - Place the hurricane lamp base on a flat work surface so the opening is on top.

Step 5 - Open the hurricane lamp wiring kit with mounting collar. The wiring kit includes the light socket, electrical cord and collar specifically made to fit the opening in a hurricane lamp.

Step 6 - Twist the collar in the opening. Screw a light bulb into the light socket. Place the hurricane globe in the mounting collar.

Tips: When installing a hurricane lamp light kit, it is possible to fill the bottom chamber of the hurricane lamp with colored water, sand, decorative glass or other colored items.

Related Bestselling Lists That You Might Like